Land Use Compatibility Assessment Using a Mdified Topsis Model: a Case Study of Elementary Schools in Tehran

Being one of the most controversial issues in urban planning, land use planning has always been in the focus of researches. Land use planning is a subdivision of urban planning which tends to arrange land uses in order to avoid conflicts among them. In order to achieve a transparent and effective urban planning, land uses should be located and allocated in an ideal situation so that avoid negative impacts from neighbouring parcels and land uses. Neighbouring land uses can produce externalities and negative impacts on other land uses because of inter-land use interaction. These externalities may be undesirable effects such as noise, air and visual pollution or may be caused by hazardous facilities. The main objective of this research is to propose a new multi-criteria evaluation model for land use compatibility assessment. Considering the fact that a considerable number of factors affect the compatibility degree of neighbouring land uses, a multi-criteria evaluation approach is employed to address the aforementioned problem. This research employs the integration of Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and Ordered Weighted Averaging (OWA) methods to facilitate land use compatibility evaluation with respect to optimism degree. The applicability of the proposed model is illustrated by the problem of land use compatibility assessment for elementary schools in Tehran. The results indicate that most of the current schools are situated in a location which is incompatible for the land use type of elementary school especially in the southern and central parts of the city

The study of correlation between forward head posture and neck pain in Iranian office workers

Objectives: Factors such as prolonged sitting at work or improper posture of head during work may have a great role in neck pain occurrence among office employees, particularly among those who work with computers. Although some studies claim a significant difference in head posture between patients and pain-free participants, in literature the forward head posture (FHP) has not always been associated with neck pain. Since head, cervical and thoracic postures and their relation with neck pain has not been studied in Iranian office employees, the purpose of this study was to investigate the relationship between some work-related and individual factors, such as poor posture, with neck pain in the office employees. Material and Methods: It was a cross-sectional correlation study carried out to explore the relationship between neck pain and sagittal postures of cervical and thoracic spine among office employees in forward looking position and also in a working position. Forty-six subjects without neck pain and 55 with neck pain were examined using a photographic method. Thoracic and cervical postures were measured using the high thoracic (HT) and craniovertebral (CV) angles, respectively. Results: High thoracic and CV angles were positively correlated with the presence of neck pain only in working position (p 0.05). Conclusions: Our findings have revealed that office employees had a defective posture while working and that the improper posture was more severe in the office employees who suffered from the neck pain

High temperature micropillar compression of Al/SiC nanolaminates

The effect of the temperature on the compressive stress–strain behavior of Al/SiC nanoscale multilayers was studied by means of micropillar compression tests at 23 °C and 100 °C. The multilayers (composed of alternating layers of 60 nm in thickness of nanocrystalline Al and amorphous SiC) showed a very large hardening rate at 23 °C, which led to a flow stress of 3.1 ± 0.2 GPa at 8% strain. However, the flow stress (and the hardening rate) was reduced by 50% at 100 °C. Plastic deformation of the Al layers was the dominant deformation mechanism at both temperatures, but the Al layers were extruded out of the micropillar at 100 °C, while Al plastic flow was constrained by the SiC elastic layers at 23 °C. Finite element simulations of the micropillar compression test indicated the role played by different factors (flow stress of Al, interface strength and friction coefficient) on the mechanical behavior and were able to rationalize the differences in the stress–strain curves between 23 °C and 100 °C

High temperature nanoindentation behavior of Al/SiC multilayers

Nanoscale Al/SiC composite laminates have unique properties, such as high strength, high toughness, and damage tolerance. In this article, the high-temperature nanoindentation response of Al/SiC nanolaminates is explored from room temperature up to 300_C. Selected nanoindentations were analyzed postmortem using focused ion beam and transmission electron microscopy to ascertain the microstructural changes and the deformation mechanisms operating at high temperature

Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation

The reliability of Pb-free solder joints is controlled by their microstructural constituents. Therefore, knowledge of the solder microconstituents’ mechanical properties as a function of temperature is required. Sn-Ag-Cu lead-free solder alloy contains three phases: a Sn-rich phase, and the intermetallic compounds (IMCs) Cu6Sn5 and Ag3Sn. Typically, the Sn-rich phase is surrounded by a eutectic mixture of β-Sn, Cu6Sn5, and Ag3Sn. In this paper, we report on the Young’s modulus and hardness of the Cu6Sn5 and Cu3Sn IMCs, the β-Sn phase, and the eutectic compound, as measured by nanoindentation at elevated temperatures. For both the β-Sn phase and the eutectic compound, the hardness and Young’s modulus exhibited strong temperature dependence. In the case of the intermetallics, this temperature dependence is observed for Cu6Sn5, but the mechanical properties of Cu3Sn are more stable up to 200°C

Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates

Composite laminates on the nanoscale have shown superior hardness and toughness, but little is known about their high temperature behavior. The mechanical properties (elastic modulus and hardness) were measured as a function of temperature by means of nanoindentation in Al/SiC nanolaminates, a model metal–ceramic nanolaminate fabricated by physical vapor deposition. The influence of the Al and SiC volume fraction and layer thicknesses was determined between room temperature and 150 °C and, the deformation modes were analyzed by transmission electron microscopy, using a focused ion beam to prepare cross-sections through selected indents. It was found that ambient temperature deformation was controlled by the plastic flow of the Al layers, constrained by the SiC, and the elastic bending of the SiC layers. The reduction in hardness with temperature showed evidence of the development of interface-mediated deformation mechanisms, which led to a clear influence of layer thickness on the hardness

The effect of increasing volume of exercise on activation pattern of vastus medialis and lateralis and its correlation with anterior knee pain in karate elites

Background: The effects of exercise volume on the pattern of muscle activity is one of the most important factors in training management and injury risk reduction. In the lower limb, the quadriceps muscle which plays a determining role in performing the stance and other karate techniques could be injured in intensive exercise and may induce anterior knee pain in athletes. Objectives: The aim of this study was to determine the relationship between training volume and muscle activity of vastus medialis and vastus lateralis and its association with anterior knee pain in karate elites. Patients and Methods: Male and female athletes from national junior and cadet karate team (14 to 18 years) were invited to participate in the study at the beginning and the end of the training camps. Studies involved measurement of electromyographic muscle activity of vastus medialis and vastus lateralis in both lower extremities with surface electromyography device and assessment of movement by electrogoniometery. Muscle activity was recorded in three tests of dachi, walking up and walking down stairs. Simultaneously, anterior knee pain was evaluated using visual analogue scale and anterior knee pain scale questionnaire. Results: Eight athletes of a total number of 23 reported increased ratings of pain in their right knees. No differences in muscle activity were observed in tests of Dachi and stairs between the groups with and without pain. Comparing Dachi task pattern at the beginning and end of training camps, there was no significant difference in pattern of biomechanical movement; however, reducing the amount of muscle activity in early and late phases of tasks was observed in electromyographic assessment. Conclusions: The results showed that performing the same task after a six-week training period, less muscle activity was required in all phases in two groups of tasks, including karate-specific movement (dachi) and activities of daily living (up or down stairs). © 2016, Sports Medicine Research Center

The modalities of Iranian soft power: from cultural diplomacy to soft war

Through exploring Iran's public diplomacy at the international level, this article demonstrates how the Islamic Republic's motives should not only be contextualised within the oft-sensationalised, material or ‘hard’ aspects of its foreign policy, but also within the desire to project its cultural reach through ‘softer’ means. Iran's utilisation of culturally defined foreign policy objectives and actions demonstrates its understanding of soft power's potentialities. This article explores the ways in which Iran's public diplomacy is used to promote its soft power and craft its, at times, shifting image on the world stage

Development of carbonaceous tin-based solder composite achieving unprecedented joint performance

Weight reduction and improved strength are two common engineering goals in the joining sector to benefit transport, aerospace, and nuclear industries amongst others. Here, in this paper, we show that the suitable addition of carbon nanomaterials to a tin-based solder material matrix (C-Solder® supplied by Cametics Ltd.) results in two-fold strength of soldered composite joints. Single-lap shear joint experiments were conducted on soldered aluminium alloy (6082 T6) substrates. The soldering material was reinforced in different mix ratios by carbon black, graphene, and single-walled carbon nanotubes (SWCNT) and benchmarked against the pristine C-solder®. The material characterisation was performed using Vickers micro-indentation, differential scanning calorimetry and nano-indentation, whereas functional testing involved mechanical shear tests using single-lap aluminium soldered joints and creep tests. The hardness was observed to improve in all cases except for the 0.01 wt.% graphene reinforced solders, with 5% and 4% improvements in 0.05 carbon black and SWCNT reinforced solders, respectively. The maximum creep indentation was noted to improve for all solder categories with maximum 11% and 8% improvements in 0.05 wt.% carbon black and SWCNT reinforced ones. In general, the 0.05 wt.% nanomaterial reinforced solders promoted progressive cohesion failure in the joints as opposed to instantaneous fully de-bonded failure observed in pristine soldered joints, which suggests potential application in high-performance structures where no service load induced adhesion failure is permissible (e.g. aerospace assemblies). The novel innovation developed here will pave the way to achieving high-performance solder joining without carrying out extensive surface preparations

A critical review of the current progress of plastic waste recycling technology in structural materials

One of the main environmentally threatening factors is plastic waste which generates in great quantity and causes severe damage to both inhabitants and the environment. Commonly, plastic waste generated on the land ends up in water bodies, resulting in detrimental solid impacts on the aquatics via poisoning and flooding the marine ecosystem. Exploring various approaches to convert plastic wastes into new products known as an efficient way to manage them and to enhance the sustainability of the environment, discussed in this article. Moreover, The limitation of the application of plastic waste for construction purposes is also considered. It is wind up that the usage of plastic waste for construction purposes will significantly rectify the sustainability of our environment and also be regarded as a trustworthy source of materials for applying in conventional materials such as concrete and asphalt